Hardware & PCB design
Custom electronics, from architecture and schematics to layout and board bring-up.
- Carrier boards & compute modules
- Mixed-signal, power & protected I/O
- High-speed interfaces
◎ English
Design house & engineering
Custom hardware design. Built into your product.
You describe it. We build it. Fast. Electronics, embedded software and enclosure development — from your initial requirements to a working prototype and production handover.
ALVEXIS ENGINEERINGHardware / Software / Integration
to complete embedded systems.Explore ForgeEdge-Core ↗
What we do
The expertise your product needs.
Bring us a complete development brief or a specific engineering challenge.
Embedded software
Firmware and system software that connect your hardware to its application.
- Linux, BSP & device drivers
- MCU firmware & RTOS
- Boot, diagnostics & protocols
Enclosure & mechanical design
The physical product, designed together with its electronics and software.
- Enclosure design & prototype integration
- Thermal paths, mounting & connectors
- Assembly & manufacturing considerations
FPGA & edge intelligence
Processing close to the sensor, built around latency, power and data constraints.
- FPGA logic & processing pipelines
- On-device AI integration
- Sensor fusion & synchronization
Integration & engineering support
Practical help to bring up, verify, improve and maintain your design.
- Design reviews & troubleshooting
- Thermal & enclosure integration
- DFM, production test & lifecycle support
ALVEXIS / HARDWARE
Hardware we develop
ForgePulse
ForgePulse — Circuit board
ForgePulse →
CommandBridge
A separate board used with FieldLink.
CommandBridge →Application-specific engineering
Engineering services for your next product
Choose the engineering work your project needs.
Custom carrier board design
Custom carrier board design for embedded compute modules: interfaces, power, PCB layout, board bring-up and production handover. Discuss your hardware project.
Explore the service ↗Embedded software development
Embedded software development for custom hardware: Linux BSPs, device drivers, MCU firmware, RTOS and edge AI integration. Plan your project with Alvexis.
Explore the service ↗Machine condition monitoring
Monitor motors, pumps and rotating equipment with vibration sensors, local analytics and machine integration. Plan a condition monitoring pilot with Alvexis.
Explore the solution ↗Satellite hardware design
Custom satellite electronics, payload processing, embedded integration and ground-test systems.
Explore satellite engineeringCustom product development
Electronic design services
Adapt an Alvexis platform or commission a custom product through an NRE — non-recurring engineering — project.
Start an NRE projectFROM REQUIREMENT TO HANDOVER
- 01
Requirements
Use case, environment, scope, success criteria and target timeline.
- 02
Design
Electronics, embedded software and mechanics developed in parallel.
- 03
Prototype
Board bring-up, firmware integration and a representative working build.
- 04
Validate
Tests against agreed requirements, integration checks and refinement.
- 05
Production handover
Agreed design files, manufacturing and test documentation, and pilot-build support.
A clear scope. A tangible engineering handover.
When a standard board cannot meet your interfaces, size or operating constraints, we can adapt a platform or develop a custom electronic system.
Your starting point
- Your application, existing design or concept
- Interfaces, power, enclosure and environment
- Prototype quantity, target schedule and known constraints
What we develop
- Electronics and PCB, firmware and device interfaces
- Enclosure, thermal integration and board bring-up
- A prototype and test plan matched to the agreed requirements
What you receive
- Agreed design and firmware files with revision records
- Prototype test findings and documented limitations
- Manufacturing and test documentation within the agreed scope
Development fees, prototype builds, unit production and ongoing support are scoped separately. Design-file access and intellectual property are defined in the proposal.
What happens next?
We review the application, identify missing information and propose a technical scope. Deliverables, acceptance criteria, schedule, price and ownership are agreed before development.
From a machine signal to a PCB acceptance test
ForgeControl shows how Alvexis designs an industrial control board around the signals on a machine. Its four analog inputs include support for 4–20 mA transmitters. Here is how an equipment manufacturer could specify and accept one of those inputs.
- Define the connection
- For a pressure transmitter, the interface sheet identifies the input terminals, loop supply and pressure range that corresponds to 4–20 mA. The transmitter needs an external supply.
- Agree on a bench test
- A proposed test uses a calibrated current source in place of the transmitter. Apply 4, 12 and 20 mA and compare the reported pressure with the bottom, midpoint and top of the specified range. Agree on the allowed error before testing.
- Record what was tested
- In the handover, link the board and firmware revisions to the wiring diagram. For each test point, record the reference current, expected pressure, observed reading and pass or fail against the agreed tolerance.
Build on an existing platform
Start with Alvexis. Make it fit your application.
Custom interfaces, firmware, compute configurations and mechanical integration around your requirements.
Discuss product customization View our product portfolio →Custom hardware development for UAE and Saudi Arabia projects
Planning an industrial project in the UAE or Saudi Arabia? Discuss custom PCB design, embedded software and edge AI integration with our engineering team in Ankara. Start with the application and agree the delivery scope before development.
What are you building?
Inspect a production line
See the inspection systemDescribe your inspection taskMonitor motors and pumps
Explore a monitoring pilotDescribe your equipmentPrototype a custom PCB
Explore carrier board designDescribe your boardWhat to send from your site
Describe the machine, its inputs and the decision it must make. Include the cabinet dimensions, available drawings and target quantity. Agree how to share confidential files or send a sample.
What the Ankara team can deliver
We can design the PCB and firmware, assemble prototypes and bench-test the agreed interfaces. The proposal lists the prototype quantity, test records and design files included in the handover.
What to agree before installation
Assign responsibility for shipping, import formalities, installation and the on-site acceptance test. Agree whether commissioning needs a local integrator, remote support or an on-site visit.
Tell us what you are building
What should your hardware do?
Describe the product and the constraint that existing hardware cannot meet. You can start with a short explanation; a complete specification is not required.
Prefer email? info@alvexis.ai
Project enquiry
Describe your application. We review the requirements, agree the scope and prepare a development proposal.